Hauptmerkmale der CNC Press Brake mit DA53T Control System
1.Hohe Biegegenauigkeit, schnelle Arbeitsgeschwindigkeit und effiziente Betriebssicherheit, Leistungsfähigkeit stabil.
2.Guter Antiknopf-Rahmen (Schweißstahl-Plattenbau), ganze Rahmen wird temperiert, reduzieren Modifikation, mit großen CNC-Fräsmaschine, Prozess in einer Zeit, versichern hohe Präzision.
3.Mit internationalen Markenteilen und CNC.
4.Alle Teile werden von CNC produce center nach Standardzeichnung hergestellt.
5.Leistungsschutzdesign, mit Lichtschutzvorhang, offene Türabschaltung, mehr Sicherheit beim Betrieb.
6.Austauschbarer Arbeitstisch und der obere und untere Hügel, kein Schweißen, Schmieden und Präzisionsschleifen.
7.Verdicken des Schiebereglers und der vertikalen Platte, um die Stabilität des Werkzeugs zu gewährleisten und die Elastizität zu reduzieren.
8.Rationelle Anordnung der Ölpipeline-Konstruktion, um einen schnellen Anstieg der Öltemperatur zu verhindern.
9.Die Ähnlichkeit von Bildern und Versandmaschinen kann 99,5% erreichen.
Haupteinrichtung der CNC Pressbremse mit DA53T Control System
DA53T Steuersystem
Y1, Y2, X, R Achs-Systemsteuerung und mechanischer Arbeitstisch Kompensation
Servo-Antriebskonverter steuert die Positionierung von Y1, Y2, X,R-Achse
Mit HIWIN Kugelschraube und Lichtstange für die Genauigkeit von 0,05mm.
Fronthalterung
Deutschland Bosch Rexroth hydraulischer Ventilblock
Deutschland EMB Ölrohr-Stecker
Deutschland Siemens Hauptmotor
France Schneider Electric
Hydraulischer und elektrischer Überlastsschutz
Top and Bottom stirbt (86 176;, R0.6mm, Material: 42CrMo)Optional
Safety Standard of CNC Pressstopp mit DA53T Control System
1.EN 12622:2009 + A1:2013
2.ENISO12100:2010
3.EN60204-1:2006+A1:2009
Front finger protection (Safety Light Vorhang)
South Korea KACON foot switch (Safety grade 4)
Rear metal safety guard and CE standard
Safety Relay monitors foot switch, safety protection
Safety standards (2006/42 / EG):
DA58T Control System of CNC Pressstopp mit DA53T Control System
1) Der neue kompakte DA-53T fügt eine hochmoderne Komplett-Touch-Steuerung für synchronisierte Pressbremsen hinzu.
2) Einfachste CNC-Programmierung basierend auf der grafischen Touch-Screen-Benutzeroberfläche von Delem.Es ermöglicht eine direkte Navigation zwischen Produktprogrammierung und tatsächlicher Produktion.
3) Diese Panel-basierte Steuerung, standardfähig zur Steuerung bis zu 4-Achsen, kann sowohl in Schränken als auch in einem optionalen Pendelarm-Gehäuse integriert werden.
4) Es ermöglicht die direkte,,Kombiautomation";hot-key-Nr.Die Funktionen befinden sich bei Bedarf und bieten eine optimierte Ergonomie während der gesamten Anwendung.
5) Die Maschineneinstellung und die Prüfbiege werden mit einer schnellen und einfachen Programm-zur-Produktion-Arbeitsfolge auf ein Minimum reduziert.

A. CROWNING SYSTEM: Manuelles Kronsystem und cnc motorisiertes Kronsystem ist optional

B. Sicherheit für CNC-Press-Bremse optional:

Optionale Ober-Werkzeuge und Down Tools of CNC Pressstopp mit DA53T Control System


B.Technical Parameters
Model | Nominal Force (KN) | Worktable Length (mm) | Poles Distance (mm) | Throat Depth (mm) | Slider Travel (mm) | Max Open (mm) | Y-axis Downward Speed (mm/sec) | Y-axis Back Stroke Speed (mm/sec) | Bending Angle Precision (°) | X-axis Max. Distance (mm) | Workpiece Linearity (mm/m) | Back Supper (PCS) | Main Motor (KW) | L*W*H (mm) |
40T/2200 | 400 | 2200 | 1850 | 230 | 100 | 320 | 80 | 70 | <±40 | 500 | 0.5 | 2 | 5.5 | 2250*1200*1910 |
40T/2500 | 400 | 2500 | 2030 | 230 | 100 | 320 | 80 | 70 | 0.5 | 500 | 0.5 | 2 | 5.5 | 2550*1200*1910 |
50T/2500 | 500 | 2500 | 1970 | 230 | 100 | 320 | 80 | 70 | 0.5 | 500 | 0.5 | 2 | 5.5 | 2550*1210*2000 |
63T/2500 | 630 | 2500 | 1970 | 250 | 100 | 320 | 80 | 70 | 0.5 | 500 | 0.5 | 2 | 5.5 | 2550*1300*2210 |
63T/3200 | 630 | 3200 | 2500 | 250 | 100 | 320 | 80 | 70 | 0.5 | 500 | 0.5 | 3 | 5.5 | 3250*1300*2210 |
80T/2500 | 800 | 2500 | 1970 | 250 | 100 | 340 | 80 | 70 | 0.5 | 500 | 0.5 | 2 | 7.5 | 2550*1450*2300 |
80T/3200 | 800 | 3200 | 2500 | 250 | 100 | 340 | 80 | 70 | 0.5 | 500 | 0.5 | 3 | 7.5 | 3250*1450*2300 |
80T/4000 | 800 | 4000 | 3100 | 250 | 100 | 340 | 80 | 70 | 0.5 | 500 | 0.5 | 4 | 7.5 | 4050*1450*2400 |
100T/2500 | 1000 | 2500 | 2000 | 320 | 120 | 370 | 80 | 70 | 0.5 | 500 | 0.5 | 2 | 7.5 | 2550*1550*2500 |
100T/3200 | 1000 | 3200 | 2600 | 320 | 120 | 370 | 80 | 70 | 0.5 | 500 | 0.5 | 3 | 7.5 | 3250*1550*2500 |
100T/4000 | 1000 | 4000 | 3100 | 320 | 120 | 370 | 90 | 82 | 0.5 | 500 | 0.5 | 4 | 7.5 | 4050*4550*2500 |
125T/3200 | 1250 | 3200 | 2600 | 320 | 120 | 370 | 90 | 82 | 0.5 | 500 | 0.5 | 3 | 7.5 | 3250*1550*2500 |
125T/4000 | 1250 | 4000 | 3100 | 320 | 120 | 370 | 90 | 82 | 0.5 | 500 | 0.5 | 4 | 7.5 | 4050*1550*2500 |
160T/3200 | 1600 | 3200 | 2510 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 11 | 3250*1700*2800 |
160T/4000 | 1600 | 4000 | 3040 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 11 | 4050*1700*2800 |
160T/5000 | 1600 | 5000 | 3800 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 5 | 11 | 5050*1900*3100 |
160T/6000 | 1600 | 6000 | 4600 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 6 | 11 | 6050*1900*3100 |
200T/3200 | 2000 | 3200 | 2510 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 15 | 3250*1950*2800 |
200T/4000 | 2000 | 4000 | 3040 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 15 | 4050*1950*2800 |
200T/5000 | 2000 | 5000 | 3800 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 5 | 15 | 5050*1950*3000 |
200T/6000 | 2000 | 6000 | 5000 | 320 | 200 | 450 | 90 | 86 | 0.5 | 500 | 0.5 | 6 | 15 | 6050*1950*3300 |
250T/3200 | 2500 | 3200 | 2510 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 18.5 | 3250*2000*3200 |
250T/4000 | 2500 | 4000 | 3040 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 18.5 | 4050*2000*3400 |
250T/5000 | 2500 | 5000 | 3800 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 5 | 18.5 | 5050*200*3400 |
250T/6000 | 2500 | 6000 | 5000 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 6 | 18.5 | 6050*2000*3400 |
300T/3200 | 3000 | 3200 | 2500 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 22 | 3250*2000*3450 |
300T/4000 | 3000 | 4000 | 3040 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 22 | 4050*2000*3450 |
300T/5000 | 3000 | 5000 | 3800 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 5 | 22 | 5050*2000*3450 |
300T/6000 | 3000 | 6000 | 4800 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 6 | 22 | 6050*2000*3450 |
400T/4000 | 4000 | 4000 | 3040 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 30 | 4050*2180*3400 |
400T/5000 | 4000 | 5000 | 3800 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 30 | 5050*2180*3500 |
400T/6000 | 4000 | 6000 | 5000 | 400 | 250 | 560 | 90 | 86 | 0.5 | 500 | 0.5 | 5 | 30 | 6050*2180*3800 |
500T/5000 | 5000 | 5000 | 3800 | 400 | 300 | 600 | 90 | 86 | 0.5 | 500 | 0.5 | 6 | 45 | 5050*3500*3700 |
500T/6000 | 5000 | 6000 | 5000 | 400 | 300 | 600 | 90 | 86 | 0.5 | 500 | 0.5 | 3 | 45 | 6050*3500*3700 |
600T/4000 | 6000 | 4000 | 3000 | 400 | 302 | 600 | 90 | 86 | 0.5 | 500 | 0.5 | 4 | 45 | 4050*4500*3700 |
C.Standard/Optional Configuration List
No. | Accessory Name | Model/Manufacturer | Others | Configuration |
1. | CNC System | DA53T Control System |
Standard |
2. | Electrics | Schneider Electric | Travel switch & Limit switch |
3. | Main Motor | Siemens motor |
4. | Back gauge, synchronous belt, synchronous wheel | Taiwan, China | positioning control |
Guaranteed precision |
5. | Frequency Converter | JRACDRIVE | positioning control |
Guaranteed precision |
6. | Pedal Switch | South Korea KACON |
7. | Backgauge | Ball screw linear guide rail-Taiwan HIWIN |
8. | Hydraulic system | Germany Bosch |
9. | Oil Pump | SUNNY-USA |
10. | Sealing Ring | Japan |
11. | Oil Tube Connector | Casing connector |
12. | Front Safety Guard | Produced by MYT |
13. | Back Safety Guard | Produced by MYT |
14. | Die | One set of standard dies |
15. | Clamping | General clamping tools |
16. | Crowning Mode | Hydraulic crowning |
Optional |
17. | Crowning Mode | Mechanical crowning |
18. | Laser Protection | DSP- Italy |
19. | Front Photoelectric Protection | LNTECH-Shangdong |
20. | Back Photoelectric Protection | LNTECH-Shangdong |
21. | Clamping | Quick clampings |
22. | System Options | E200P、DA41S ,DA66T、DA52S、E300、CT8 |